danwalsh


Dan Walsh's Blog

Got SELinux?


Previous Entry Add to Memories Share Next Entry
Creating a Kiosk Account using SELinux and Fedora 8.
danwalsh
Over the last few months, in between playing my own personal version of Wack A Mole (AVC).   I have been working on Roles Based Access Control (RBAC) or confining users.  As I have explained in previous blogs, I have defined a policy to be used for the least privledged login terminal and X Windows users. 

One of the goals of this was to define a Kiosk User account. the idea was to secure these machines that you can walk up to at the library, bank,  airport, coffee shop and just login and use the internet.  So I investigated how to do this with SELinux. 

I demonstrated this account to  Jonathan Blandford from the Fedora Desktop Team saw it and suggested it would be cool to use one of these accounts with Fast User Switching.
 
One problem with this,  we need to be able to use this account without a password.   From a security stand point. we can only protect the account if SELinux is enabled and in enforcing mode.   We needed a new pam module  for this.  I asked Tomas Mraz to look into this and he created pam_selinux_permit

man pam_selinux_permit

PAM_SELINUX_PERMIT(8)          Linux-PAM Manual          PAM_SELINUX_PERMIT(8)

NAME
       pam_selinux_permit - PAM module to allow/deny login depending on
       SELinux enforcement state

SYNOPSIS
       pam_selinux_permit.so [debug] [conf=/path/to/config/file]

DESCRIPTION
       The pam_selinux module allows or denies login depending on SELinux
       enforcement state.

       When the user which is logging in matches an entry in the config file
       he is allowed access only when the SELinux is in enforcing mode.
       Otherwise he is denied access. For users not matching any entry in the
       config file the pam_selinux_permit module returns PAM_IGNORE return
       value.

       The config file contains a simple list of user names one per line. If
       the name is prefixed with @ character it means that all users in the
       group name match. If it is prefixed with a % character the SELinux user
       is used to match against the name instead of the account name. Note
       that when SELinux is disabled the SELinux user assigned to the account
       cannot be determined. This means that such entries are never matched
       when SELinux is disabled and pam_selinux_permit will return PAM_IGNORE.
...

Now we can create an xguest account with disabled  password.  Then we can setup xdm to use pam_selinux_permit.

# useradd -Z xguest_u xguest


# cat /etc/pam.d/gdm
#%PAM-1.0
auth     [success=done ignore=ignore default=bad] pam_selinux_permit.so
auth       required    pam_env.so
auth       include     system-auth
auth       optional    pam_gnome_keyring.so auto_start
account    required    pam_nologin.so
account    include     system-auth
...
session    required    pam_selinux.so open
session    required    pam_namespace.so
session    optional    pam_gnome_keyring.so


Add the xguest user to the /etcv/security/sepermit.conf
# cat
/etc/security/sepermit.conf
# /etc/security/sepermit.conf
#
# Each line contains either:
#        - an user name
#        - a group name, with @group syntax
#        - a SELinux user name, with %seuser syntax
xguest



If SELinux is in enforcing mode, you can log into this account just by clicking on the xguest user.  If you try to reach this accound by any means other then xdm you will not be able to login.  sshd, rshd, telnetd will all fail.

If you put the machine into permissive mode  or disable selinux, you  will no longer be able to login as this user.  This will not effect a currently logged in user however.

You can also use Fast User Switching to switch to this user.  Just add the User Switcher applet to your tool bar and select xguest.  You should switch to this account and be automagically logged in.

To add additional security to this account, it would be useful to have all files/directories removed that were created by the xguest user.  So if a new person uses the xguest, he can guarantee a clean environment.  So we can setup pam_namespace to generate a new Homedir, /tmp and /var/tmp. Every time the X Windows session ends.  You need pam_namespace.so added to /etc/init.d/gdm for this, as shown above.

Also add these lines to /etc/secuirty/namespace.conf
/tmp    tmpfs   tmpfs   ~xguest
/var/tmp        tmpfs   tmpfs   ~xguest
$HOME           tmpfs   tmpfs   ~xguest

This says to generate three temporary filesystems mounted on  /tmp, /var/tmp and $HOME directory for only xguest any time he logs in.

I have generated an rpm package and spec file that will set this all up for you.  You can try this out at

http://people.fedoraproject.org/~dwalsh/xguest/



There are three booleans that you can set for this account.
getsebool -a | grep xguest

  • browser_confine_xguest

    This indicates whether the xguest account will transition to xguest_mozilla_t or not.  If you turn this boolean on, xguest will be able to browse the web using firefox/mozilla.  If you turn it off the account will only be allowed to run mozilla/firefox locally.  You will not have any access to the net.

  • browser_write_xguest_data

This will determine whether firefox can write to the home directory or not.

If this boolean is turned off firefox will only be allowed to write to .mozilla and .gnome in the home directory.
If you wanted to add a download directory you could add a file context and label it xguest_mozilla_home_t

# semanage fcontext -a -t xguest_mozilla_home_t /home/xguest/Download(/.*)?
# restorecon -R -v ~/xguest
  • allow_xguest_exec_content
This boolean determines whether the xguest account can execute files in its home directory or /tmp.  This can prevent some forms of attack on users.

I have created xguest.spec and xguest-1.0.0-1.fc8.noarch.rpm

out on
http://people.fedoraproject.org/~dwalsh/xguest/
Which will set everything up for you.  Try it out and tell me what you think.

No HTML allowed in subject

  
 
   
 

(will be screened)

You are viewing danwalsh